A new version of the firmware is ready to download here Improvements are in the front panel microprocessor and includes the following: Start up issue completely resolved. On some bands and frequency segments RGO ONE can not initialize properly LO
3rd production lot is depleted. Please fill in preorders for upcoming 4th production lot here: https://docs.google.com/forms/d/e/1FAIpQLSfBFLsgv9OAIjpQE64ziLtZ44DHl73DTupcbjGaa9yN7c5_Tw/viewform?vc=0&c=0&w=1&flr=0
Needed parts:1. SMD resistor 5% case 0805 value 100kohm2. Firmware update to version 2.20A for front panel and main board processors Some users complained of interferences caused by strong local broadcast station on LW/MW. We designed 7th order Chebishev high
New software version is available to upload on your RGO ONE transceiver. This version includes some improvements in MB and FP microprocessors clock rate, speed and correct timing.Setting proper clock rate for MB processor. (Clock frequency away from HAM bands).
As from today 9.9.2020 a new firmware version is ready to be flashed via USB port to your RGO ONE HF transceiver. Ver.2.10b This version includes some improvements in Automatic Antenna Tuner (ATU) speed and performance, menu 22 CAT interface
New tech supplement is ready. It includes all changes and mods done by now. TECHNICAL SUPPLEMENT 2.10A 1. SSB GEN board – CW carrier “trial tone” mod done. Added gain for “Line in” input. Digi pot bias mode done.
Modest propagation on 10m and very few stations from Asia working. My setup was: RGO ONE – main operating transceiver Elecraft K3 – switched off most of the time ACOM-2000 amplifier Antenna 5 element YAGI monoband at 12m portable mast
RGO ONE software update files and notes: Version 2.00A Ver.2.00a Version 2.10b from 9.9.2020 Ver.2.10b Version 2.20A from 4.4.2021 FW_2.20A Version 2.34A from 30.6.2021 FW_2.34A Version 2.39b from 29.3.2022 FW_2.39b Version 2.40A from 10.5.2022 – CURRENT VERSION FW_2.40A