CAT operation manual for RGO ONE V6 is available for download here
RGO ONE V6 has set of 40 CAT commands that can control – set or read the values of VFO frequencies, menu parameters and other functions of the radio.
CAT protocol used is TS-480 compatible for most of the functions so most of the PC program should work with RGO ONE.
Main CAT connection is via standard USB cable. Virtual com port should be installed on your PC. There is second CAT port with TTL levels to be used for external devices as antenna tuners, power amplifiers, band switching and other. This port doubles the main USB CAT port work and responds always to requests no matter where they are received – on main USB port or second TTL port
New CAT (Computer aided transceiver) operation manual